This ESC is based on a 32-bit ARM processor clocked at 120 MHz and uses a 6-layer 85g copper textolith, which, combined with an 85V/1.2mΩ MOSFET, guarantees excellent conductivity, efficient heat dissipation, and reliable operation under extreme loads.

The controller fully supports popular protocols such as PWM, Oneshot125, Oneshot42, Multishot, DShot in all variations up to DShot2400, ensuring compatibility with any modern flight controller.

Built-in current sensors and telemetry allow real-time monitoring of system load, power status, and operating parameters.
It runs on AM32 v2.17 firmware, an open and stable platform with flexible customization options.

For stable operation of the system under high current conditions, it is provided:

BEC 12 V / 3 A – for powering peripherals
TVS protection (4 × 1500 W) – against power surges
680 μF / 63 V ×2 filter capacitors – for noise reduction and protection against peak loads
The board is mounted using a universal 30.5 × 30.5 mm template, with overall dimensions of 113 × 76 mm.

Microprocessor: 32-bit ARM, 120 MHz
PCB: 6-layer textolite, 3oz copper
MOSFET: 85V/1.2mΩ
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, DShot150 / 300 / 600 / 1200 / 2400
Current sensor: supported
Telemetry: supported
Firmware: AM32 v2.17
BEC: 12 V / 3 A
TVS protection: 4 × 1500W
Filter capacitors: 2 × 680 µF / 63 V
Mounting: 30.5 × 30.5 mm (M3)
Dimensions: 113 × 76 mm